What potential loopholes in your low-quality data cables?
The copper wire gauge of your data cable is shortage.
1) For example, 24AWG copper wires is replaced with 28AWG copper wires. The shortage of inner copper will make your data cable easy to be over-load or over-current, make your data cable can not reach service life to be designed.
2)The PVC cover of your data cable is disqualification.
Usually, the PVC cover of data cable must be compliance with UL standard,that assured your cable flame-resistance, corrosion-resistance and flexibility. But some vendor manufacture it with low-quality material that easy to cause your data cable breakage or ignited.
3) The quality of connector is below standard.
For example, salt spray test is below standard, the inner copper designed to be gold plating is made with nickle plating etc......, these will cause your data cable can not work very well,or cause your data cable can not reach the service life to be designed.
4) Manufacturing technique.
Qualified supplier will strictly follow the production process,well-trained workers as well as operation instruction in each step will guarantee your data cable good quality. It is very rare to find short-circuit、cold solder joint、injection adverse etc.....
So,our advice is better to find the qualified supplier, confirm the drawing,specification before the quotation and order is placed.SINETECH, your partner, good quality and good service!
ShenZhen Sinetech electronic co., ltd strictly follow the drawings or samples with the wire, such as USB to RJ45 female console cable, Micro USB up angle cable, 5525 DC to micro USB cable all use the same spec as customer required to provide high quality goods.
