Twisted pair
Twisted pair (Twisted pair) is divided into shielded (Shielded Twisted pair, STP) and unshielded (Unshielded Twisted pair, UTP). The so-called shielding means that the signal wire inside the network cable is wrapped with a layer of metal mesh, and the shielding layer is the insulating sheath. The shielding layer can effectively isolate the interference of external electromagnetic signals.
UTP is currently the most frequently used network cable in local area networks. This kind of network cable is wrapped in a plastic insulating sheath with 8 signal wires. Two of them are entangled with each other as a pair, forming a total of four pairs. The twisted pair is also named. The purpose of twisted pairs twisted with each other is to use the electromagnetic field generated by the current in the copper wire to cancel the interference of adjacent lines and reduce the interference from the outside world. The number of times that each pair of wires are twisted with each other in each inch of length determines the anti-interference ability and the quality of communication. The tighter the twist, the higher the communication quality and the higher the network data transmission rate. Of course, its cost is also higher. High.
Coaxial cable
Coaxial cable refers to a cable with two concentric conductors, and the conductor and the shielding layer share the same axis. Because it wraps the insulating material outside the main line, and there is a layer of woven shielded metal wire outside the insulating material, it can well block the external electromagnetic interference and improve the communication quality.
The advantage of coaxial cable is that it can support high-bandwidth communication on a relatively long line without repeater, but its disadvantages are also obvious: First, it is large in size, and the diameter of a thin cable is 3/8 inches thick, which takes up the cable. The pipeline has a lot of space; second, it cannot withstand tangles, pressure and severe bending, which will damage the cable structure and prevent signal transmission; third, the cost is high. All these shortcomings can be overcome by twisted-pair cables. Therefore, in the current local area network environment, they have basically been replaced by Ethernet physical layer specifications based on twisted-pair cables. Coaxial cables are divided into thin cables and thick cables.
Optical fiber
Optical fiber (Fiber Optic Cable) transmits signals in the form of light pulses, so the material is mainly glass or plexiglass. It is composed of fiber core, cladding and protective cover.
The structure of the optical fiber is very similar to that of a coaxial cable, and the center is an optical fiber made of glass or transparent plastic, surrounded by protective materials, and multiple optical fibers can be combined in one optical cable as needed. According to the different ways of optical signal generation, optical fiber can be divided into single-mode fiber and multi-mode fiber.






