RJ50 To Open End Cable

RJ50 to open end cable Product introduction The 10P 10C plug of this cable is commonly referred to as an RJ50 connector, it has 10 contact positions and 10 contacts. The most common uses of the RJ50 10P10C connector are in proprietary data transfer systems, such as the Digiboard and Equinox...

Send Inquiry

RJ50 to open end cable Product introduction

The 10P 10C plug of this cable is commonly referred to as an RJ50 connector, it has 10 contact positions and 10 contacts. The most common uses of the RJ50 10P10C connector are in proprietary data transfer systems, such as the Digiboard and Equinox Super-Serial multi-port TIA-232 adapters. This connector is also used to implement RS-485 interfaces, and for data link connections in APC and Eaton uninterruptible power supplies. This cable is RJ50 to open end cable, The other end of this cable is stripped and tinned, this kind of stripped and tined wire is easy to solder to the PCB board or connect to a specified jack.

Features:

1. The Rj50 10P10C plug is assembly connector, it is easy to be changed.

2. It is very suitable for DIY enthusiasts.

3. High quality Ethernet copper wire for good data transmission.

Product specification

Product Name	RJ50 to open end cable
Type	Assembly RJ50 cable
Length	0.5 meter
Feature	10P10C full connection
Wire	Braided Ethernet wire
packaging	Poly bag

Main differences between RJ50 and RJ45;

RJ50 is 10P10C plug, RJ45 is 8P8C plug. The RJ50 connector is usually used for It is mostly used for linking bar code scanners and proprietary data centers, while the RJ45 is more typically used in information systems for data transfer by making a connection to Ethernet wires.

10p10c rj50